Cut Comb Honey

Cut Comb container.

White with clear lid. Per each or per carton.

Two sizes to chose from:

110mm x 110mm x 40mm - Holds Approximately 340 Grams

Comes in cartons of 245

75mm x 75mm x 35mm - Holds Approximately 150 Grams

Comes in cartons of 305

The ideal tool to make your comb honey cutting easy 

Get the perfect size every time.

Its made from stainless and cuts a 10cm square to suit our cut comb containers.

This stand takes one full depth frame perfectly and presents it in a way where people can just look in awe or dig in with a spoon and help themselves!

Great for a buffet arrangement - people a always impressed seeing the frame as it is from the hive.

made from stainless steel and design to funnel the drips to the bottom on where you can put a plate to catch them.

Sheet Size: 422 x 212mm

Approximately 357 Sheets fit in a carton. Cartons may have up 1 week lead time or more.

All of the beeswax used for this comb foundation is first heated to approximately 110 degrees Celsius before being micro filtered to remove all dross and moisture. This ensures that when you buy our comb foundation, you are only paying for pure beeswax.

The filtered liquid beeswax then passes to the sheeting machine. This converts the beeswax from a liquid state into a continuous flat sheet and is one of the secrets of making high quality comb foundation. During this process, the beeswax gains greatly in elasticity and strength to the point where a piece of cold comb foundation can be scrunched up and then flattened out again without breaking.

The rolls of sheet then pass to the automatic milling machine. The pure beeswax sheet passes between two precision engraved rollers which imprint the pattern onto the beeswax. The continuous sheet is then cut to size.

Throughout the process, stringent quality control checks are continuously carried out. The life of our Comb Foundation is indefinite if stored in proper packaging and in dry conditions. Because of its purity, it is not attacked by wax moths.

Technosetbee Full Depth #2 Frame for Comb Honey Production:

This new revolutionary frame is designed for comb honey production. The beekeeper simply cuts a sheet of wax foundation into two pieces as shown in the photos and inserts each piece through an opening in the top of the frame. (One small offcut is not required.) The two squares are 203mm x 195mm each. A plastic capping locks it into place.

The Thin Super wax foundation can be purchased already cut to the correct size here.

When honey is capped, simply slice with an electric knife or a hot knife into the desired sizes. 

Each of the 4 rectangles (or windows) in the frame are 184mm high. The 2 outer rectangles are 88mm wide. the 2 inner rectangles are 97mm wide. If the comb is cut to 105mm long to suit the larger square containers, the comb honey will weigh between 300g and 340g, depending on thickness. 

Cut-comb honey containers are available here. Cut the honey comb up to suit the container sizes.

Manufactured from high quality food grade polypropylene.  End bars are 36mm wide. 10 frames will fit snugly per box. Alternatively you could fit 9 frames per box and space them evenly to produce thicker slabs of comb honey.

Comb Honey is very much sort after and sells for very high prices. These frames make the job so much easier and more efficient.

Frame net weight: 0.35 Kg

Caution! Do not use these frames in areas where the bees could collect poisonous Tutin. 

In NZ tutin zones, any honey harvested after 31st Dec must be tutin tested. When the honey is cut from the frames, the honey dribbles from every cut must be collected, blended and a sample sent to an authorised laboratory for tutin testing before the honey is sold or given away.

Tutin can potentially be collected anywhere by the bees above the latitude line of 42 degrees south in NZ. (Where the Passion Vine Hoppers live)

Sheet Size: 422 x 157mm

All of the beeswax used for this comb foundation is first heated to approximately 110 degrees Celsius before being micro filtered to remove all dross and moisture. This ensures that when you buy our comb foundation, you are only paying for pure beeswax.

The filtered liquid beeswax then passes to the sheeting machine. This converts the beeswax from a liquid state into a continuous flat sheet and is one of the secrets of making high quality comb foundation. During this process, the beeswax gains greatly in elasticity and strength to the point where a piece of cold comb foundation can be scrunched up and then flattened out again without breaking.

The rolls of sheet then pass to the automatic milling machine. The pure beeswax sheet passes between two precision engraved rollers which imprint the pattern onto the beeswax. The continuous sheet is then cut to size.

Throughout the process, stringent quality control checks are continuously carried out. The life of our Comb Foundation is indefinite if stored in proper packaging and in dry conditions. Because of its purity, it is not attacked by wax moths.